9号彩票

Welcome Kunshan Daxinhua Laser Technology Co.,Ltd website!

ENGLISH简体中文

Kunshan Daxinhua Laser Technology Co.,Ltd

Kunshan Daxinhua Laser Technology Co.,LtdLaser Equipment Manufacturer
Hotline

0086 0512-33336621

Popular keywords:Laser welding|Laser marking|Laser inkjet|Laser cutting|Laser micromachining

Contact us
hotline:0086 0512-33336621

Contacts: Lucky Yeh

Tel: 0086 512 33336621

Phone: 0086 18761059661

Skype: jing_ye@hotmail.com

Fax: 0086 512 82177297

Email: lucky@dxh-laser.com

Location:Home > News > Company news

Demolition and installation of galvanometer for laser marking machine

Date:2018-10-11 9:59:13 Number of visits:
Laser marking machine in the use of the process will inevitably have some problems, then when we find out that the galvanometer problems, how to disassemble and install it? Today, Da Xin Hua laser marking machine Xiaobian to brief you.
The steps to remove the galvanometer are as follows:
1. In the case of guaranteeing complete power failure, disconnect the plug-in power cord connector, if some styles do not have this connector then you can ignore.
2. Remove the field mirror, and do a good job of protection and cover, in the process of operation, finger and any other objects can not impact the field mirror, especially the lens.
3. Use hardware tools, generally for the inside corner pickpocket, screw down the marking head, be careful, in case the shell plate is connected to the galvanometer drive plate, to prevent pulling force.
4. Unplug all wires, power supply lines, signal wires, motors to the drive board.
5, remove the driving plate and pack it well, then remove the Y motor and X motor, and pay attention to packing. Pack the drive board together with the X and Y motors so that the demolition of the galvanometer is complete and can be mailed to a serviceable location.
The steps to install the galvanometer are as follows:
1. Firstly install Y motor and X motor, and ensure that they can not collide with each other at any angle.
2, install two driving boards.
3. After connecting all the wires, test and adjust the angle and depth of the galvanometer motor to ensure that the final laser output center is the center of the field mirror.
4, clean up the connection, and sort out the length of the wire, etc., then put all the heads on the box.
5, connect the external connection, you can restart the machine. At this time, the laser scanner is installed.
The above is the Da Hsin Hua laser marking machine, and I hope to help you. Daxinhua laser production and sales of optical fiber laser marking machine, optical fiber laser welding machine, free technical guidance, free samples. Welcome to inquire /en/
友情链接:9号彩票  9号彩票  9号彩票  9号彩票  万家彩票  万家彩票网  9号彩票  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!