9号彩票

Welcome Kunshan Daxinhua Laser Technology Co.,Ltd website!

ENGLISH简体中文

Kunshan Daxinhua Laser Technology Co.,Ltd

Kunshan Daxinhua Laser Technology Co.,LtdLaser Equipment Manufacturer
Hotline

0086 0512-33336621

Popular keywords:Laser welding|Laser marking|Laser inkjet|Laser cutting|Laser micromachining

Contact us
hotline:0086 0512-33336621

Contacts: Lucky Yeh

Tel: 0086 512 33336621

Phone: 0086 18761059661

Skype: jing_ye@hotmail.com

Fax: 0086 512 82177297

Email: lucky@dxh-laser.com

Location:Home > News > Industry news

How to determine the best marking distance of laser marking machine

Date:2018-10-12 11:42:29 Number of visits:
Laser marking machine processing different materials, their material properties are different, processing the best distance is also different. Today, Daxinhua optical fiber laser marking machine to brief you, laser marking machine the best marking distance how to determine.
Laser marking machine will generally be equipped with a probe, and you have to calculate, marking a product needs time, and adjust the speed of the pipeline, to achieve mutual coordination, it should be possible to estimate, in the laser marking software have marking a product used time, and then adjust the laser marking machine in the processing, affected by different factors  Ringing. After the marking range is determined and the focal length is determined, the pink square on the control interface is drawn as a rectangle on the right. Adjust the "drawing speed" to 1000MM/S, the "starting speed" to 2000 MM/S, and then adjust the appropriate power, hit the marking icon, so that the system into a standard state of preparation, in the focal plane has been determined to place a dozen samples, click "manual marking", so that the rectangular complete marking on the proofing paper. The length (mm) of the long rectangular edge on the proofing paper is measured with a ruler, which is the actual range that the laser marking machine can mark. This step is very important, only this value is determined, the future font size can be accurate, movement speed will be relatively accurate. After this range is determined, the size and size of the marking content will be the same as the user-defined values. If not, the value of TestLine Leng must be incorrect, and the above steps must be re-calibrated. Otherwise, the future defined values of speed, word spacing, induction delay, and workpiece width are also incorrect. . After determining the focal length and the marking range, this step is not necessary unless the lens is changed.
How can we determine the best distance of processing under these factors?
1. Laser marking machine can mark different materials with laser technology, so the properties of materials have a great influence on the determination of processing distance. The properties of materials, such as different densities, hardness, laser absorption rate are different, the processing effect is different, which requires the operator to adjust the processing distance, has reached the best processing effect.
Two, the power of the laser marking machine will affect the setting of the best marking distance. Motor power is one of the factors that customers should consider when purchasing laser marking machine. It has high power, and its processing depth and range are relatively wide.  Therefore, laser power is a factor that can not be ignored when setting the mark distance. We should match the material properties with the motor power.
Three, whether the operator's operation is correct or not will also affect the determination of machining distance. Operators must be systematically trained to understand the structure of the machine in order to effectively process.
Four, determine the best marking distance according to the processing speed of laser marking machine. Laser marking machine processing speed is fast, the depth of processing sometimes because of high-speed processing is not deep enough, adjusting the marking distance helps to improve the depth of processing. In the high-speed processing of laser marking machine, we set the distance suitable for its processing speed in the computer program settings to ensure the smooth processing.
The above is the content of Xiaobian finishing of Da Xin Hua fiber laser marking machine, hoping to help you!  Daxinhua laser production and sales of optical fiber laser marking machine, optical fiber laser welding machine, free technical guidance, free samples. Welcome to inquire /en/
友情链接:八八彩票  9号彩票  万家彩票网  八八彩票官网  9号彩票  9号彩票  万家彩票官网  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!